Quick Quote

K-Series T-BOX · Steel Toilet Cabin

Portable Toilet Cabin for Saudi Construction Sites and Worker Camps

Saudind manufactures the K-Series T-BOX portable toilet cabin at its Al-Kharj factory — a steel-framed unit on 50 mm sandwich panel, not a moulded plastic or fibreglass shell. Each cabin is configured for toilet type, basin, water supply and drainage before quotation.

  • Steel Sandwich Cabin 50 mm panel · 1.4 mm steel frame · 304 stainless floor
  • Squat · Western · Double · Shower K-Series cabin builds for site and camp use
  • Up to 36 Cabins Road-legal cabin width — no escort permit
Request Toilet Cabin Quote View K-Series T-BOX Models

Product Range

Find Your Toilet Cabin by Site Condition

Eleven K-Series T-BOX cabin builds. Hover a site condition to see the models that fit.

Configurable with on-board waste tank or external IBC for sites without mains water or sewer.

Stainless Steel Squat Cabin

  • Size1220 x 1120 x 2355 mm
  • Fit-Out304 stainless squat pan
  • Feature20L flush tank · Ø110 sealed outlet
Long-term site & camp Request Model Quote

Ceramic Flush Squat Cabin

  • Size1220 x 1120 x 2355 mm
  • Fit-OutCeramic squat pan
  • Feature1.2L flush · hand spray · sealed drain
Temporary housing & camp Request Model Quote

Squat Toilet + Shower Cabin

  • Size1220 x 1120 x 2355 mm
  • Fit-Out304 stainless squat + shower
  • Feature50L shower tank · hot/cold system
Long-term site, with shower Request Model Quote

Ceramic Seated Toilet Cabin

  • Size1220 x 1120 x 2355 mm
  • Fit-OutCeramic seated toilet
  • FeatureNo fixed install · Ø110 drain outlet
Site & event use Request Model Quote

Double Seated Toilet Cabin

  • Size2145 x 1220 x 2325 mm
  • Fit-OutTwin ceramic seated toilets
  • FeatureDouble layout · higher space efficiency
Site & event, twin Request Model Quote

Double Squat Toilet Unit

  • Size2145 x 1220 x 2325 mm
  • Fit-OutTwin 304 stainless squat pans
  • FeatureDual 20L tanks · dual drain outlets
Large workforce · clustering Request Model Quote

Squat + Seated Toilet Unit

  • Size2145 x 1220 x 2325 mm
  • Fit-OutOne squat + one seated toilet
  • FeatureMixed layout · dual 20L flush tanks
Mixed squat / seated layout Request Model Quote

Seated Toilet + Shower Unit

  • Size2145 x 1220 x 2325 mm
  • Fit-OutSeated toilet + shower room
  • FeatureModular split design · quick assembly
Emergency & short-term Request Model Quote

Toilet + Shower Wet/Dry Unit

  • Size2145 x 1220 x 2325 mm
  • Fit-OutToilet + shower combination
  • FeatureWaterproof cabinet · outdoor placement
Short-term · wet/dry use Request Model Quote

Restroom + Shower + AC Unit

  • Size3320 x 1220 x 3325 mm
  • Fit-OutToilet + shower + AC room
  • FeatureAC ventilation · emergency deployment
Remote & emergency Request Model Quote

Double Shower Room

  • Size3320 x 1220 x 3325 mm
  • Fit-OutTwin shower rooms
  • FeatureTwo shower positions · hot/cold system
Camp accommodation showers Request Model Quote

Product Specification

KS-S1 Stainless Steel Squat Toilet Cabin

A single squat-toilet cabin on a 1.4 mm steel frame with 304 stainless floor and a sealed Ø110 mm waste outlet. Built for construction sites, worker camps and remote project facilities.

K-Series T-BOX · KS-S1

Stainless steel squat toilet cabin

Project References

Toilet Cabins on Project Sites

Factory-built K-Series toilet cabins supplied to construction sites, worker camps and remote projects. Project details confirmed at quotation.

K-Series T-BOX toilet cabins supplied to a Riyadh construction site Construction Site · [Riyadh]
Case 01

Site toilets for a main contractor

KS-S1 × [12] units · 304 stainless squat · supplied [2025]

K-Series T-BOX toilet cabins supplied to a Dammam worker camp Worker Camp · [Dammam]
Case 02

Camp sanitation block

KS-S2 × [8] double units · male / female split · up to 200 uses/day

K-Series T-BOX toilet cabins supplied to a remote Al-Kharj region project Remote Project · [Al-Kharj region]
Case 03

Off-grid cabins with on-board tanks

KS-W1B1E1 × [6] units · on-board waste tank · no mains/sewer

K-Series T-BOX toilet and shower units supplied to Jeddah camp accommodation Camp Accommodation · [Jeddah]
Case 04

Toilet and shower units for housing

KS-B2T1 + KS-W1B1 × [10] units · shower + toilet · flat-pack delivery

These units were supplied as factory-built cabins and delivered by project scope.

Request a Similar Setup
Configuration Data

K-Series Toilet Cabin Configuration & Specifications

K-Series Model Data
Assembled Size 1220 x 1120 x 2355 mm Single cabin · squat toilet
Packed Size 1230 x 1130 x 920 mm from K-Series parameter data
Panel & Frame 50 mm sandwich panel · 1.4 mm steel frame 304 stainless anti-slip floor
Data 01

Toilet Type

Squat toilet / Western toilet / Squat + western

KS-S1 / KS-S2 use squat toilet. KS-W1 / KS-W2 use western toilet. KS-W1S1 combines both.

Data 02

Cabin Layout

Single unit / Double unit / Multiple units / Male-female separation

Single cabin footprint 1220 x 1120 mm. Double unit footprint 2145 x 1220 mm.

Data 03

Basin & Fit-Out

Triangular ceramic basin / Hand spray (shattaf) / Floor drain

K-Series cabins list a triangular floor-standing ceramic basin, hand spray and 304 stainless floor drain.

Data 04

Water & Waste

Water tank / Direct water connection / Waste tank / Direct drainage

Flush tank holds 20 L (10 L on KS-W1B1). Tank or direct connection follows the site water source and sewer condition.

Data 05

Cabin Details

Ventilation fan / Wall louver exhaust / Anti-slip floor / Arabic-English signage

K-Series data lists a single door, lower exhaust fan, upper round window, wall louver exhaust, white frame and white wall panel, with male / female signage.

Quote Inputs

A quote is prepared from project location, worker quantity, male / female split, water source, sewer condition and toilet type.

Saudi Factory Support

Factory-Built Toilet Cabins With QC And Delivery Support

Saudind manufactures the K-Series T-BOX portable toilet cabin at its 15,000 m² Al-Kharj factory, with sanitary ware, plumbing, lighting and ventilation assembled and checked before delivery.

Factory 15,000 m² factory in Al-Kharj
In-Kingdom Support 100+ install crew · 300+ spare part SKUs
Project Scope Supply, delivery or installation coordination
Factory Workflow

Factory work completed before the toilet cabin reaches site

Cabin body, sanitary ware, plumbing and ventilation are assembled and checked in the factory, then the unit is flat-packed for transport.

Saudind Saudi factory workshop for portable toilet cabin manufacturing
Factory Manufacturing Cabin body fabrication and fit-out preparation
Sanitary ware installation for K-Series T-BOX portable toilet cabin
Assembly Sanitary ware, plumbing and ventilation installation
QC inspection and loading for portable toilet cabin delivery
QC And Delivery Inspection, packing and loading before shipment
01 · Manufacturing Cabin and fit-out work

Cabin body, plumbing, sanitary ware, lighting, ventilation, flooring and signage.

02 · QC Before Delivery Inspection points

Door, lock, toilet, basin, water connection, drainage outlet, lighting and fan.

03 · Delivery Scope Project support options

Supply only, supply with delivery, installation coordination and site connection guidance.

Clear Responsibility Boundary

Supply
Factory-built cabin units

Portable toilet cabin units are produced and checked by Saudind before delivery arrangement.

Delivery
Coordination by project location

Delivery support is planned according to site location, access condition, quantity and contract scope.

Install
Installation support by scope

Installation coordination and site guidance can be included when confirmed in the project quotation.

Utility
Connection details confirmed before work

Water source, drainage outlet and sewer connection method should be confirmed before production or site placement.

Factory Visit
Factory inspection welcome

Buyers can arrange a visit to the Al-Kharj factory to inspect cabin builds before order confirmation.

Confirm Delivery Scope WhatsApp

Portable Toilet Cabin FAQ

Questions About Toilet Cabins Before You Order

Specific questions from site managers and procurement teams comparing K-Series T-BOX toilet cabins — covering structure, site conditions, relocation, lifespan and camp planning in Saudi Arabia.

Cabin Structure

Panel, frame, floor, door and ventilation details.

Site Use

Heat, relocation, cleaning and long-term camp use.

Camp Planning

Unit count, layout, male / female separation and ablution.

A portable toilet is a general term that includes any freestanding sanitation unit. A portable toilet cabin is a factory-built structural unit — it has a steel frame, wall panels, a lockable door, a window, ventilation, lighting and a full floor. It functions like a small room rather than a plastic housing. Saudind K-Series T-BOX cabins are assembled from flat-packed panels by two workers in 30 minutes, then placed directly on site with no foundation or civil work. The cabin stays on site for the duration of the project and can be disassembled and moved when the project ends.
K-Series T-BOX cabins are rated for an operating temperature range of −10°C to +55°C and a humidity tolerance up to 95%. The wall and roof panels are 50 mm colour-steel foam sandwich board, which provides thermal insulation against direct sun exposure. The steel frame is electrostatic-sprayed for UV and corrosion resistance. Ventilation is handled by a lower exhaust fan, wall louver and upper door window working together to maintain airflow even when ambient temperature is high. Units are also anchored via the base frame — they do not shift in sandstorm wind conditions.
Yes. Because the cabin requires no fixed foundation, it can be repositioned by forklift, crane or flatbed truck as the site layout develops. Each single unit weighs approximately 105–125 kg and has forklift channels and a crane lifting ring built into the structure. Disconnecting and reconnecting water and waste lines is straightforward provided the new position has the same utility access. This makes the cabin a practical choice for phased construction sites where sanitation zones need to shift as work progresses.
The K-Series T-BOX uses a 1.4 mm steel frame with electrostatic anti-corrosion spraying, 304 stainless steel floor and a sealed panel structure. With standard maintenance — regular cleaning, waste tank service and occasional door hardware checks — the cabin structure is built for multi-year site use. The first components to show wear are door hinges and latch hardware, which are replaceable without replacing the cabin. The floor, frame and panels are designed to outlast the duration of most Saudi construction projects.
For a construction site or worker camp running at normal use levels, daily interior cleaning is the standard. The K-Series floor is 304 stainless anti-slip steel or ceramic tile — both surfaces wipe down quickly and do not retain odours the way porous materials do. Waste tank pump-out frequency depends on tank size, daily use count and temperature: higher temperatures accelerate decomposition, so more frequent service is better practice in Saudi conditions. If the cabin is connected to direct drainage, pump-out is not required — only routine interior cleaning applies.
Yes. The KS-W1B1 and KS-W1B1E1 models combine a toilet and shower in a single cabin unit. The shower zone is separated by an 8 mm tempered glass partition with a 304 stainless 3-head shower, hot and cold control and a 50 L hot water tank. This configuration is commonly used on Saudi worker camps where post-shift washing and pre-prayer ablution are both part of daily use. For large camps needing dedicated shower blocks without a toilet, the KS-B2T1 double shower unit is the purpose-built option.
A practical starting point used in Saudi construction projects is one toilet cabin per 15–20 workers, adjusted for shift overlap, cleaning frequency and camp layout. The K-Series single cabin (KS-S1, KS-W1) handles up to 80 uses per day; a double unit (KS-S2, KS-W2) handles up to 200 uses per day. Sites with round-the-clock shifts or limited cleaning access should plan a higher ratio. Send your worker count, shift pattern and site plan so Saudind can recommend a specific cabin arrangement.
Yes. K-Series double units (KS-S2, KS-W2, KS-W1S1) are factory-built as two independent stalls sharing one structural frame. Multiple double units can then be placed side-by-side to form a larger toilet block — useful for large worker camps requiring male and female separation in adjacent zones. Each unit within a cluster has its own independent drain outlet and flush system, so servicing one unit does not interrupt the others. The modular frame design is specifically built for this kind of scalable grouping.
K-Series models offer three floor finishes: 304 stainless anti-slip steel, ceramic anti-slip tile and marble stone. For construction sites and worker camps, the 304 stainless floor (1.2 mm, knurled anti-slip surface) is the most practical — it is fast to clean, does not stain, handles heavy footfall and resists the sand and grit that enters from outdoor site conditions. Ceramic tile is commonly selected for camps where aesthetics matter more. Marble is used in the combined toilet-shower unit (KS-W1B1E1) where a higher-finish interior is required.
Yes. Exterior colour, project logo and Arabic / English directional signage are applied at the factory before shipping. Male and female signs, accessible toilet markings and occupancy indicators are standard options. Custom RAL colours — including camouflage patterns used in specialist remote camp or military project orders — are available for bulk orders. All signage is printed or applied as part of the cabin panel finish, not added on as stickers after delivery.

Get a Quote

Start Your
Project Quote
Today

Send us your project details and our Saudi-based factory team will prepare a tailored proposal within 24 hours — with specs, production lead time, local delivery plan, and installation support.

Saudi-Made-ar
Address

92P8+MG, Southern Hyt, Riyadh 14575

Support

+966 532580666
info@saudind.com

Request a Quote

Municipality_&_Events